WIKI Liberasys

Cette page est en lecture seule. Vous pouvez afficher le texte source, mais ne pourrez pas le modifier. Contactez votre administrateur si vous pensez qu'il s'agit d'une erreur.
====== Installation of Big Blue Button 2.0 on Ubuntu server 16.04 ======

===== Network =====
<code bash>
vim /etc/network/interfaces
</code>
  auto lo
  iface lo inet loopback
  
  auto ens18
  iface ens18 inet static
    address 195.154.50.30
    netmask 255.255.255.255
    post-up ip route add 192.168.60.254 dev ens18
    post-up ip route add 0.0.0.0/0 via 192.168.60.254
    pre-down ip route del 0.0.0.0/0 via 192.168.60.254
    pre-down ip route del 192.168.60.254 dev ens18
<code bash>
vim /etc/resolv.conf
</code>	
  nameserver 9.9.9.9 # or another DNS
  search <FQDN>
<code bash>
vim /etc/hosts
</code>
  <IP>  <FQDN>  <ALIAS>
<code bash>
reboot
</code>
===== Installation =====

==== Prerequisites ====

**If KVM** : # apt install qemu-guest-agent
<code bash>
apt update
apt upgrade
locale-gen en_US.UTF-8
apt install haveged
</code>
==== Installation automatique ====
<code bash>
wget https://raw.githubusercontent.com/bigbluebutton/bbb-install/master/bbb-install.sh
chmod +x ./bbb-install.sh 
./bbb-install.sh -v xenial-200 -s <FQDN>
bbb-conf --setip <FQDN>
</code>
=== Configuration SSL ===

== Nginx ==
<code bash>
mkdir /etc/nginx/ssl
cp private-key.key /etc/nginx/ssl
chmod 0600 /etc/nginx/ssl/private-key.key
cp certificate.crt /etc/nginx/ssl
openssl dhparam -out /etc/nginx/ssl/dhp-2048.pem 2048
</code>
<code bash>
vim /etc/nginx/sites-enabled/bigbluebutton
</code>
Add after "server_name" :

  listen 443 ssl;  
  listen [::]:443 ssl;
  
  ssl_certificate /etc/nginx/ssl/certificate.crt;  
  ssl_certificate_key /etc/nginx/ssl/private-key.key;  
  ssl_session_cache shared:SSL:10m;  
  ssl_session_timeout 10m;  
  ssl_protocols TLSv1 TLSv1.1 TLSv1.2;  
  ssl_ciphers "ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS:!AES256";
  
  ssl_prefer_server_ciphers on;  
  ssl_dhparam /etc/nginx/ssl/dhp-2048.pem;  

== FreeSWITCH ==
<code bash>
vim /opt/freeswitch/conf/sip_profiles/external.xml
</code>
Change "ws-binding" to "wss-binding" and ":5066" by ":7443".
<code bash>
vim /etc/bigbluebutton/nginx/sip.nginx
</code>
  proxy_pass https://<FQDN>:7443;

== Load HTTPS connection default ==
<code bash>
vim /var/lib/tomcat7/webapps/bigbluebutton/WEB-INF/classes/bigbluebutton.properties
</code>
  bigbluebutton.web.serverURL=https://<FQDN>
<code bash>
vim /usr/share/red5/webapps/screenshare/WEB-INF/screenshare.properties
</code>
  jnlpUrl=https://<FQDN>/screenshare  
  jnlpFile=https://<FQDN>/screenshare/screenshare.jnlp
<code bash>
sed -e 's|http://|https://|g' -i /var/www/bigbluebutton/client/conf/config.xml
vim /usr/local/bigbluebutton/core/scripts/bigbluebutton.yml
</code>
  playback_protocol: https
<code bash>
vim /var/lib/tomcat7/webapps/demo/bbb_api_conf.jsp
</code>
  String BigBlueButtonURL = "https://<FQDN>/bigbluebutton/";
<code bash>
bbb-conf --restart
</code>
===== HTML5 client installation =====

==== MongoDB and NodeJS ====
<code bash>
apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv 0C49F3730359A14518585931BC711F9BA15703C6
echo "deb [ arch=amd64,arm64 ] http://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.4 multiverse" | tee /etc/apt/sources.list.d/mongodb-org-3.4.list
apt update
apt install install -y mongodb-org curl
curl -sL https://deb.nodesource.com/setup_8.x | sudo -E bash -
apt install -y nodejs
</code>
==== HTML5 client ====
<code bash>
apt install bbb-html5
</code>
To load HTML5 client by default, edit ///var/lib/tomcat7/webapps/bigbluebutton/WEB-INF/classes/bigbluebutton.properties// :

  # Force all attendees to join the meeting using the HTML5 client  
  attendeesJoinViaHTML5Client=true  

  # Force all moderators to join the meeting using the HTML5 client  
  moderatorsJoinViaHTML5Client=true
<code bash>
bbb-conf --restart
</code>
If the service "kurento-media-server" is masked :
<code bash>
systemctl unmask kurento-media-server
systemctl enable kurento-media-server
systemctl start kurento-media-server
</code>
===== Greenlight frontend =====

==== Docker ====
<code bash>
apt install apt-transport-https ca-certificates curl software-properties-common
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
add-apt-repository "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable"
apt update
apt install docker-ce
</code>
==== Greenlight ====
<code bash>
mkdir ~/greenlight && cd ~/greenlight
docker run --rm bigbluebutton/greenlight:v2 cat ./sample.env > env
docker run --rm bigbluebutton/greenlight:v2 bundle exec rake secret
</code>
Write the secret on the "SECRET_KEY_BASE" parameter in "//~/greenlight/env//".
<code bash>
bbb-conf --secret
</code>
Write the URL and the secret in "//~/greenlight/env//" file on the "BIGBLUEBUTTON_ENDPOINT" and "BIGBLUEBUTTON_SECRET" parameters.

Check configuration :
<code bash>
docker run --rm --env-file env bigbluebutton/greenlight:v2 bundle exec rake conf:check
</code>
=== Nginx ===
<code bash>
docker run --rm bigbluebutton/greenlight:v2 cat ./greenlight.nginx | sudo tee /etc/bigbluebutton/nginx/greenlight.nginx
systemctl restart nginx
</code>

To make Greenlight the HTTP home page of BBB, add this on bottom of ///etc/nginx/sites-available/bigbluebutton// :

  location = / {
          return 307 /b;
  }

Same, but for HTTPS :

  location = / {
          return 301 https://$server_name/b;
  }

Rebot :
<code bash>
systemctl restart nginx
</code>
==== Starting Greenlight ====
<code bash>
sudo curl -L https://github.com/docker/compose/releases/download/1.22.0/docker-compose-$(uname -s)-$(uname -m) -o /usr/local/bin/docker-compose
chmod +x /usr/local/bin/docker-compose
cd ~/greenlight
docker run --rm bigbluebutton/greenlight:v2 cat ./docker-compose.yml > docker-compose.yml
docker-compose up -d
</code>

==== Stopping Greenlight ====
<code bash>
docker-compose down
</code>

===== Error 1002 for WebRTC =====

[[http://docs.bigbluebutton.org/10install.html|"Audio not working" section]]
	
Edit ///opt/freeswitch/conf/vars.xml//

Remove

  <X-PRE-PROCESS cmd="set" data="local_ip_v4=xxx.yyy.zzz.qqq">

Change

  <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/>

by

  <X-PRE-PROCESS cmd="set" data="bind_server_ip=EXTERNAL_IP_ADDRESS"/>

Change

  <X-PRE-PROCESS cmd="set" data="external_rtp_ip=stun:stun.freeswitch.org"/>

by

  <X-PRE-PROCESS cmd="set" data="external_rtp_ip=EXTERNAL_IP_ADDRESS"/>

Change

  <X-PRE-PROCESS cmd="set" data="external_sip_ip=stun:stun.freeswitch.org"/>

by

  <X-PRE-PROCESS cmd="set" data="external_sip_ip=EXTERNAL_IP_ADDRESS"/>

Edit ///opt/freeswitch/conf/sip_profiles/external.xml//

Change

	<param name="rtp-ip" value="$${local_ip_v4}"/>
	<param name="sip-ip" value="$${local_ip_v4}"/>
	<param name="ext-rtp-ip" value="$${local_ip_v4}"/>
	<param name="ext-sip-ip" value="$${local_ip_v4}"/>

by

	<param name="rtp-ip" value="$${local_ip_v4}"/>
	<param name="sip-ip" value="$${local_ip_v4}"/>
	<param name="ext-rtp-ip" value="$${external_rtp_ip}"/>
	<param name="ext-sip-ip" value="$${external_sip_ip}"/>

Edit ///usr/share/red5/webapps/sip/WEB-INF/bigbluebutton-sip.properties//

	bbb.sip.app.ip=<internal ip>
	bbb.sip.app.port=5070

	freeswitch.ip=<internal ip>
	freeswitch.port=5060

Edit ///etc/bigbluebutton/nginx/sip.nginx//

	location /ws {
        	proxy_pass https://<FQDN>:7443;
	        proxy_http_version 1.1;
	        proxy_set_header Upgrade $http_upgrade;
	        proxy_set_header Connection "Upgrade";
	        proxy_read_timeout 6h;
	        proxy_send_timeout 6h;
	        client_body_timeout 6h;
	        send_timeout 6h;
	}
<code bash>
bbb-conf --restart
</code>
===== Links =====

[[http://docs.bigbluebutton.org/install/install.html|BBB installation]] 
[[http://docs.bigbluebutton.org/html/html5-install.html#step-by-step-installation|HTML5 client installation]]

===== Nginx configuration file =====

  server {
    listen 443 ssl;
    listen [::]:443 ssl;
    listen   80;
    listen [::]:80;
  
    server_name <FQDN>;
  
    ssl_certificate /etc/nginx/ssl/certificate.crt;
    ssl_certificate_key /etc/nginx/ssl/private-key.key;
    ssl_session_cache shared:SSL:10m;
    ssl_session_timeout 10m;
    ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
    ssl_ciphers "ECDH+AESGCM:DH+AESGCM:ECDH+AES256:DH+AES256:ECDH+AES128:DH+AES:ECDH+3DES:DH+3DES:RSA+AESGCM:RSA+AES:RSA+3DES:!aNULL:!MD5:!DSS:!AES256";
    ssl_prefer_server_ciphers on;
    ssl_dhparam /etc/nginx/ssl/dhp-2048.pem;
  
    access_log  /var/log/nginx/bigbluebutton.access.log combined_ssl;
  
    # Handle RTMPT (RTMP Tunneling).  Forwards requests
    # to Red5 on port 5080
    location ~ (/open/|/close/|/idle/|/send/|/fcs/) {
    proxy_pass         http://127.0.0.1:5080;
    proxy_redirect     off;
    proxy_set_header   X-Forwarded-For   $proxy_add_x_forwarded_for;
  
    client_max_body_size       10m;
    client_body_buffer_size    128k;
  
    proxy_connect_timeout      90;
    proxy_send_timeout         90;
    proxy_read_timeout         90;
  
    proxy_buffering            off;
    keepalive_requests         1000000000;
  }
  
     # Handle desktop sharing tunneling.  Forwards
     # requests to Red5 on port 5080.
   location /deskshare {
     proxy_pass         http://127.0.0.1:5080;
     proxy_redirect     default;
     proxy_set_header   X-Forwarded-For   $proxy_add_x_forwarded_for;
     client_max_body_size       10m;
     client_body_buffer_size    128k;
     proxy_connect_timeout      90;
     proxy_send_timeout         90;
     proxy_read_timeout         90;
     proxy_buffer_size          4k;
     proxy_buffers              4 32k;
     proxy_busy_buffers_size    64k;
     proxy_temp_file_write_size 64k;
     include    fastcgi_params;
   }
  
    # BigBlueButton landing page.
    location / {
      root   /var/www/bigbluebutton-default;
      index  index.html index.htm;
      expires 1m;
    }
  
    # Include specific rules for record and playback
    include /etc/bigbluebutton/nginx/*.nginx;
  
    #error_page  404  /404.html;
  
    # Redirect server error pages to the static page /50x.html
    #
    error_page   500 502 503 504  /50x.html;
    location = /50x.html {
      root   /var/www/nginx-default;
    }
  }